How to select the amount of oil supplied in a helical bevel gear drive

When using helical bevel gears, we often consider the problem of oil supply, different people have different views, there are many people how to choose the oil supply problem, our company mainly sells helical bevel gears and other products, so this knowledge is also very clear, the company also has relevant technical personnel. Now we want to introduce how to choose the amount of oil supplied in the helical bevel gear transmission.

Under certain conditions (such as low-speed small-size transmission), the amount of oil supplied by each oil supply point is very close, and the lubrication cooling effect is also very good, and the total heat can generally be transmitted from the tooth surface of more than 90. That is, most oil supply points achieve satisfactory lubrication and cooling results. However, in another case (such as high-speed large-size transmission), the amount of oil supplied by each oil supply point of view varies greatly, with some differences of more than ten times. The lubrication and cooling effects of the teeth are also very different, and some oil supply views specify an oil supply of less than 30% of the total heat. This means that the amount of oil supplied has lost its practical significance. From the above two phenomena, it can be shown that each oil supply view has certain limitations.